Instructions for choosing electric wires from poles to the house

If families want to use electricity, they will have to manually pull the wire from the electric pole into the house. To ensure safety, you need to pay attention to choosing quality wires. Refer to the article below, Daphaco will guide you how to choose the electric wire from the pole to the house!

Some notes when choosing electric wires from poles to the house

The electrical wire used to pull from the pole into the house is called outdoor electrical wire. This type of wire is characterized by having to operate in harsh environments with sun, rain, high temperature and humidity. Therefore, please note that when choosing outdoor electrical wires, you must prioritize those with good quality and high durability to ensure safety.

Here are some notes for you when choosing electric wires from poles to the house:

You should only choose electrical wires with XLPE insulation

When choosing outdoor electrical wiring, choose one with XLPE insulation instead of PE. Because this material is highly durable, it can withstand environmental impacts and limit chemical corrosion.

Prioritize choosing unconnected electrical wires

Please note that when choosing electric wires from poles to the house, give priority to choosing non-connected wires. Because the joints are made manually, if the quality is not guaranteed, it will be dangerous to use. Furthermore, the use of unconnected electrical wires also provides better load-carrying capacity and durability in harsh weather.

Choose a wire of appropriate length

Currently, electric wire manufacturers have confirmed that electric wires have the best ability to transmit power over a distance of 30m. In case the distance from the electric pole to your house is greater than 30m, you need to seek advice from an electrical engineer.

In fact, the longer the electrical wire, the higher the potential for energy loss. Therefore, you need to choose a large sized wire to ensure energy transmission efficiency.

Instructions on how to pull wires from electric poles to the house

To pull the wire from the electric pole to the house, you need to follow the steps below:

Step 1: Choose the electrical wire from the post to the house

In Vietnam today, the line of electrical wires specifically used to conduct electricity from pillars into houses is CXV wire. This type of wire has the following advantages:

–        Core made of pure copper ensures electrical conductivity.

–        Insulating layer made of virgin plastic XLPE helps insulate and insulate to ensure safety.

–        The high-quality, durable PVC sheath helps the wire resist harmful environmental factors.

Currently, CXV electric wires have many types: 1 core, 2 cores, 3 cores, 4 cores… In which, 3-core and 4-core CXV electric wires are used for 3-phase electricity. Depending on your needs, you can also consider choosing the appropriate type.

Step 2: Determine the power source diagram provided by EVN

If you want to pull the electric wire from the post to the house, you need to understand the electrical diagram provided by EVN as follows:

EVN’s electric wires => Electricity distribution to each household => Each household will have 1 separate meter => General Aptomat => Connect electricity from the Electric pole Aptomat to the Aptomat in the household.

Based on the power supply contract, EVN will be responsible for managing the wires from the main power supply wire to the meter. And from the electricity meter to the house, this is the customer’s responsibility. Therefore, you are only allowed to replace the power wire after the main circuit breaker on the power pole. Before Aptomat, no intervention is allowed.

Step 3: Proceed to pull the electric wire from the pole to the house

After you have determined which wires need to be replaced. Please use the electrical wire prepared in advance to pull the wire from the pole to the house. All connection steps must be performed according to technical standards.

Step 4: Check the quality of the electrical wire

Finally, you need to check the quality of the wire by turning on the circuit breaker. If the electrical equipment in the house operates normally, without any problems, the electrical connection has been successful. On the contrary, if the power is turned on and there is a problem, it needs to be fixed immediately.

Buy a quality brand of electric wire from the pole to the house

Please note that when buying electric wires from poles to the house, you need to choose products from reputable brands to ensure quality. On the market today, there are many different electric wire brands introduced. Among them is the LION electric wire brand of Daphaco Electric Cable Joint Stock Company, which is very popular.

Daphaco’s electrical wire products come in a variety of types and designs for customers to choose from. The product is made from premium materials ensuring high quality and durability. You can use LION electric wire to make a very safe connection wire from the electric pole to the house.

Customers need to refer to and use Daphaco’s electrical wire products. Come to the company’s store or official distributor for advice and support immediately!

Conclusion:

Hopefully the above article has helped you know how to choose and pull the electric wire from the pole to the house. If you need to buy LION power cord to use. Dear customers, please come immediately to a genuine LION electric wire distributor. Or contact hotline immediately: 0283 719 1177 for free consultation!